Chain
We stock a range of Pre cut & on the roll chains suitable for a range of different maximum loads.
Galvanised, Chrome Plated, Black, Brass
From 1.5mm diameter upwards
£0
Gatemate hook to drive
These Field Gate Hooks to Drive comes finished in Galvanised. They are 215mm in length and have a pin of 19mm which is suitable for most bands and straps.
£0
Gatemate shoot bolt
This Gatemate shoot bolt is a simple bolt that is used with timber field gates. The bolt is fixed on the inside of the gate stile, with a hole drilled...
£0
Gatemate hunting type lift catch
The Field Gate Hunting Type Lift Catch has a Galvanised finish which is a zinc coating on steel. This prevents corrosion and allows for a longer lasting product.
£0
Gatemate Adjustable gate eye with two nuts
Adjustable gate eye bolts with two nutsDesigned for fields and farm gatesGalvanized finishAvailable in 3 sizesSold individually
£0
Gatemate hook to build
Hook to Build bolts are used to hang gates on with brick pillars. The Hooks are built into the brick pillars at pre-determined heights, for both the bottom and top...
£0
Gatemate Gate hanger to bolt
GATEMATE® Gate Hanger to BoltGalvanised finishSuitable for use on timber posts
18 x 3/4"
£0
4x4 x 3/4" Adjustable hook on plate
Take a look at this easy gate hanging hook on plate. It's ideal for fixing when your posts are not 100% straight. It comes with a fixed welded nut on...
£0
Gatemate 3" Heel Clip only
These Heel Clips, also known as U Brackets, are combined with a Gate Eye to make an Adjustable Bottom Fitting. The Heel Clips can also be used as a replacement...
£0
Gatemate throwover loop with handle
Gatemate throw over gate loop 350mm long. Sizes available: 18" and 12" Suitable for a pair of 3' gates. 12" suitable for a pair of 2' gates Available in Galvanised...
£0
Adjustable double strap hinge set
These Gatemate field gate adjustable double strap hinge sets, are fully adjustable allowing easy installation and adjustment in the future, for example if the gate drops it can be re-adjusted....
£0
Gatemate Gate eye to weld flat base
These Gate Eyes to Weld are flat-based or have a radius base. They are available in a variety of sizes including:
5/8"
3/4"
1"
1 1/4"
£0
Gatemate Gate hook to weld flat base
Gatemate These Gate Hooks to Weld are in a Self Coloured Steel with a multitude of pin sizes for all applications. Available in several sizes inc' 1-1/4" 1" 7/8" 1/2"...
£0
Gatemate Cranked leg striker for self locking gate catch
This cranked striker is approximately 8 Inches in size. This Cranked Striker is used for self locking field gates and field gate catches. The gate catch automatically engages when the...
£0
Gatemate straight leg striker for self locking gate catch
This Straight Leg Striker for Self Locking Field Gate Catches is to be used in conjunction with the Self Locking Catches to securely hold gates in a locked position.
£0
show 0-16 of 44 products